Q. IS THE DESKTOP PHONE THE UNIT I USE TO PROGRAM THE SYSTEM?

A. Yes the Desktop is the programming unit and the unit set to EXT-0.

Q.HOW MANY EXTENSIONS CAN I HAVE ?

A. Up to 10 in any combination of cordless desktop and cordless handheld.

Q.WHAT NUMBER IS THE DESKTOP EXTENSION SET AS?

A. The desktop unit is set as extension 0.

Q.WHAT NUMBERS ARE THE TWO HANDHELD UNITS SET AS?

A. The two handheld units are set as1&2.

Q. HOW DO I CONFIGURE THE CORDLESS TELEPHONE SYSTEM?

A. From the keypad and LCD display on extension '0' or from a standard PC via the RS232 port.

Q. HOW DO I REGISTER THE EXTENSIONS TO THE MAIN CONTROL UNIT?

A. To register the handsets or to change the extensions numbers is the same procedure,

press the MENU key of your extension,

scroll the up or down key to select 'register'

press the key SELECT to confirm.

Then select 'register' from the sub menu by using the scroll key

press the key SELECT to confirm.

press the key OK for 'Really Register'

Input EXT number from the dial keys and then press OK to confirm.

After assigning the extension number, press the SET button on the Main Control Unit.

Wait for a beep sound.

Press the OK to confirm the registration on the extension.

Set user name, continue to enter a name by pressing the dial keypad and press the OK when finished.

IF THE QUIT BUTTON IS PRESSED DURING REGISTRATION THEN YOU WILL NEED TO START THE PROCEDURE FROM THE BEGINNING, AS IT VOIDS THE REGISTRATION.

Q. CAN I REGISTER MORE THAN ONE EXTENSION NUMBER AT A TIME?

A. No you have to go through the same procedure each time you register or change an extension number.

Q. I AM GETTING PHANTOM CALLS WHAT COULD BE THE PROBLEM?

A. There could be a range problem or an extension problem, one way to determine this, is to bring all the extensions into the area with the main control unit, then try the system, if there is still a problem then you can eliminate each extension one at a time until you find the fault. If the system works fine with all the extensions in one room then you will need to re-assess the layout of the extensions and see if the range path is clear with no major obstacles, if the path has obstacles the extensions need to be repositioned to allow the range path to be clearer. If the problem returns then you will need a repeater. You can use up to a maximum of 4 repeaters. SEE SECTION ON REPEATERS.